Hello,
This is my newbie print, orc head from thingiverse, . Printed at 0.025mm z layer height, with standard LittleRP X,Y settings. Used the sample resin that came with the kit.
. Approximately 2800ms per layer.
And here's the T-800 head from thingiverse. I couldn't locate the exact one I downloaded; there seem to be many variations on there. Printed at 3500ms at 0.050mm per layer. From chin to the top of the head is about 2.5cm.
And PacManFan, please feel free to use any of the pictures I posted on here.