Page 2 of 3
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Wed Mar 15, 2017 11:43 am
by Deaner3D
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Wed Mar 15, 2017 1:41 pm
by Dr. Woo
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Wed Mar 15, 2017 9:11 pm
by Deaner3D
Here's the back stick of my printer. Purchased from on 2/17 for $588. Seems they've raised the price since then...
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Sun Mar 19, 2017 10:39 am
by malamen
hello!i need help! why does the platform get stuck to the tank? And there is a noise coming from the motor as if it cannot lift it up...and first print took all lsd perimetr....150*60 mm ((((
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Sun Mar 19, 2017 10:59 am
by malamen
sorry,but i think the printer needs improvement))))
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Tue Mar 21, 2017 7:23 am
by dragokirov
This printer has a constructive defect and the real print is 150-200 microns XY
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Tue Mar 21, 2017 8:41 am
by Dr. Woo
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Tue Mar 21, 2017 9:35 am
by dragokirov
the distance from the screen to the resin, the size of the pixels,LED beam angle and calculation the trapezoid+ light bleed
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Thu Mar 23, 2017 3:49 pm
by Dr. Woo
Re: Proniks KLD-LCD1260 / YHD-101: Improvement & feature wish list
Posted: Thu Mar 23, 2017 4:56 pm
by dragokirov
The pixel is just so big as you say, but only the blue pixel work. You can calculate the bleeding. Calculate the rest, I am sure in my. Just for experiment, try to print something thinner than 250 microns XY. I guarantee that will not happen.
You can try with this. 60 micron wall thickness