Page 25 of 44
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sat Jan 28, 2017 9:51 am
by 3dprinter.org.ua
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sat Jan 28, 2017 10:08 am
by 3dprinter.org.ua
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sat Jan 28, 2017 10:28 am
by 3dprinter.org.ua
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sun Jan 29, 2017 9:06 am
by 3dprinter.org.ua
How about this
https://www.aliexpress.com/item/1920-12 ... 92854.htmlWe can protect it:
https://www.aliexpress.com/item/9H-Temp ... 15689.htmlpoint size in a matrix of less than 100 microns
this printer will be accurate enough and inexpensive.
Also, we can use UV led 3014 Like this:
https://www.aliexpress.com/item/e27-5w- ... 07474.htmlwe can get 15 watts if the tape is pasted on the perimeter of the matrix 9 inches
And why all use UV LED?
UV lamp cheaper and powerfull:
https://www.aliexpress.com/item/LED-Bul ... 21595.htmlhttps://www.aliexpress.com/item/220V-36 ... 59110.html
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sun Jan 29, 2017 2:00 pm
by Oleg
Do not disassemble !!!!
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sun Jan 29, 2017 5:30 pm
by 3dprinter.org.ua
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Sun Jan 29, 2017 6:14 pm
by kaddison
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Mon Jan 30, 2017 1:03 pm
by Oleg
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Mon Jan 30, 2017 2:44 pm
by mandrea
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Posted: Mon Jan 30, 2017 2:53 pm
by LacoDeLoco