Build Your Own SLA/SLS

Does anyone know if this projector emits the right wavelength? Is it a good option? I am planning my first build and it looks good for my budget. Any feedback is appreciated.

Details:
Acer K132 WXGA DLP LED Projector, 600 Lumens

Projection System: DLP®
Display Panel: 0.45" DMD
Resolution: Native WXGA (1280 x 800), Maximum UXGA (1600 x 1200), 1080P (1900 x 1280)
Aspect Ratio: 16: 10 (native), 4:3, 16:9
Contrast Ratio: 10000:1
Brightness: 600 ANSI Lumens(Standard), 480 ANSI Lumens (ECO)
Lamp Life: 20,000 hours (Standard), 30,000 hours (ECO)
Projection Lens: F = 2.0, f = 14.95mm, Manual focus
Keystone Correction: +/-40 degrees (Vertical), manual & auto
Noise Level: 33 dBA (Standard mode) / 29 dBA (ECO mode)
Input Interface: HDMI/MHL (Video, Audio, HDCP) x 1, Analog RGB (via Optional 24-pin Universal to VGA cable) x 1
Control Interface:USB (Mini-B)
Weight:.91 lbs. (system unit only)

you would have to mod it to use an UV LED. If it's your first build and you're not experienced with electronics i'd highly recommend to go with a traditional Projector, WXGA projectors are cheap enough.
try the Acer X1373W. It looks like a H6510BD but with a lower resolution. And it costs as little as the K123.

Cheers ^^