Build Your Own SLA/SLS

Hello
I'm in a process of constructing a SLS/SLM 3D printer witch is controlled by a galvo base system. I have all the hardware parts but i still need a software to control the hole thing.
I bought a nice controller for a Chinese company Sunny CSC-Usb board, it can control 3 axis galvo digital xy2-100 or +/- 10V and 4 stepper motor's via step and direction + a lot of in/out ports, 2 encoder's.
My question: It is possible to implement this controller in the software? I have all driver's, firmware, .h files and .dll files for my controller.

I'm willing to pay for trouble.

Thank you!

Maybe it would have been a good idea to post this in the software section. There's a subforum for Creation workshop which i guess you are referring to

But as you are here already, are you willing to post links to the hardware you have bought? Could be interesting for some people here.

hi mecanicu,

if your going to use galvo's i would suggest to have a look at opensl.

http://pryntech.com/wiki/index.php?title=Software

cheers,
hp

Sorry by not posting in the software. OpenSL is not a option for me because that board is not intended to control galvos using xy2-100 protocol. It is intended for laser show galvos (they are not designed to work at high speeds accurately 20000mm/s as industrial galvos)
Here is a link for controller http://www.sunny-technology.com/pro_con.aspx?type=89