ReCoat - An easy way the repair your resin vat - Kickstarter
Posted: Mon Jun 22, 2015 6:19 am
Hey all,
we would like you to have a look on our Kickstarter as owner and semiprofessional user of a SLA Printer we had often to fight with the degradation of the silcone layer of the resin vat. We followed since than a manual process which we thought could be simpler. So we sat down and figured out the right components with the right application method: here we are with DruckWege ReCoat!
https://www.youtube.com/watch?v=5ht3JqeqPw8
Have a look at our
Or at our
We would like to have your feedback, please let us know if you have some questions.
we would like you to have a look on our Kickstarter as owner and semiprofessional user of a SLA Printer we had often to fight with the degradation of the silcone layer of the resin vat. We followed since than a manual process which we thought could be simpler. So we sat down and figured out the right components with the right application method: here we are with DruckWege ReCoat!
https://www.youtube.com/watch?v=5ht3JqeqPw8
Have a look at our
Or at our
We would like to have your feedback, please let us know if you have some questions.