Please move 'Home' button!!
Posted: Sun May 31, 2015 10:33 pm
I'm probably the only one who's done this...I went to press the 'lift' (or whatever you call it) button, which is right under the 'Home' button and hit the wrong one! The build on the plate kept the printer from reaching the end stop and by the time I remembered how to shut it off my couplers were stretched to over twice their normal length! At least I know now that the cheap window pane I bought at Lowe's for the bottom of my vat is up to that kind of load!
It would seem reasonable that since the 'Home' button moves the build plate in the opposite direction of the lift (at least when building bottom up) it should be a bit distant from the column. Just a thought...
Bob
It would seem reasonable that since the 'Home' button moves the build plate in the opposite direction of the lift (at least when building bottom up) it should be a bit distant from the column. Just a thought...
Bob