Build Your Own SLA/SLS

hello
i m owner of b9 mashine
but i want to make my own
want help for modify software to run any dlp projector or lcd
all parts of b9 are easily available
http://www.aliexpress.com/item/Geeetech ... 67978.html

i am at a loss what you need , all parts and drawings including the arduino code are available for download , along with the pcb artwork
anyhow let me know what you need .

I've been thinking about adding B9 support for some time. No one has approached me about it before. I can take a look at the API.

b9 sw work with vivitek projectors i need to remove this
i like to try any projector or lcd with software
kast3d also used this software in his 3d printer
sorry for my english

quickreplier:
yes altering the code can be done, and also using CW is an option , with some code written for it (plugin)

however their are many commands used that are projector specific communications , so knowing what projector you wish to change to
would be required , and you would also need to make sure the projector also fits the needs , not only of printing but also has remote capability via the usb or serial port , and that the
command structure of the serial port is known,if not published then you would need to contact the projector manufacturers.

this would be required for every projector you wish to use , so far better to stick to one manufacturer
but modifying it to be able to use any projector is a larger time consuming project, although it can be done


contact me off list if you wish

Dave

I would love to run Titan1 from Kudo3d with B9 software. the projector its using is Acer H6510bd and the motor driver is based on Ramps piggy backing on Arduino.
Thanks
Kim