Page 1 of 1
Any DLP project are good
Posted: Mon Jul 18, 2016 1:42 pm
by Nitros
Hi all.
Sorry for the question but I'm new.
Any DLP projector are good with the LR?
If so what specs need to check when I buy a projector?
Thank You
Re: Any DLP project are good
Posted: Tue Jul 19, 2016 9:16 am
by DanOrgan
Obviously, you need good native resolution. 1920 * 1080 is good, bigger is better.
And you need short focus, or you could not fit projected image to small VAT.
Re: Any DLP project are good
Posted: Thu Jul 21, 2016 11:09 am
by MartinCB
Hade the exact same question, thanks!
Re: Any DLP project are good
Posted: Thu Jul 21, 2016 5:02 pm
by Nitros
so i need min 1920 * 1080 and with short focus.
must be DLP? or another technology is good too?
any example on the budget?
Thank You
Re: Any DLP project are good
Posted: Sun Jul 31, 2016 4:16 pm
by Nitros
Re: Any DLP project are good
Posted: Tue Aug 02, 2016 5:00 pm
by Mattasmack
It's not a DLP projector ... it might not pass the violet and UV wavelengths of light needed to cure most resins. (But maybe it will! I'm not entirely clear on what SXRD imagers are, but at least it's not regular LCD technology which almost certainly won't work.)
If you are thinking of buying it, I would recommend not. If you've already purchased it, well, give it a shot with the resin you plan to use -- and let us know how it goes!
Re: Any DLP project are good
Posted: Tue Aug 02, 2016 6:22 pm
by Nitros
I canceled the order I think I will go with the viewsonic
Re: Any DLP project are good
Posted: Wed Aug 03, 2016 7:47 am
by Nitros
still looking
Re: Any DLP project are good
Posted: Wed Aug 03, 2016 9:15 am
by dangre
Why not go with what LRP recommends:
Supported Projectors
– Acer P1283
– Acer X1240
– Acer P1500
– Acer H6510BD
– ViewSonic PJD7820HD (Same as Acer P1500)
– Hitachi CP-DX250 / CP-DX300 (Same as Acer X1240)