Super adhesion free release bed
Posted: Wed Mar 16, 2016 10:49 pm
Hi Guys, I just wanted to share with you this Build Plate I just modified, since I did this my adhesion failures have been reduced to 0%http://imgur.com/iF62nYahttp://imgur.com/StHYj3F
drilled 1.5mm holes in an 5-5mm array. Then I grinded the surface with a broken drill bit.
Re: Super adhesion free release bed
Posted: Thu Mar 17, 2016 12:55 pm
I've found that drilling holes into the build plate and hitting it with some 320 grit sandpaper (without scratching the surface this aggressively) is enough. Never had any adhesion issues.