Build Size
Posted: Tue Sep 01, 2015 10:36 am
I have been using my printer for a good bit now and I love the detail I can get out of it. The only real issue I have is I have almost no reliablity in print size. I am using a H6510BD projector eith makerjuice green and red sf.
I have hit a frustration level now where my prints have steadily degraded where I am having difficulty printing evven a 1" circle in the middle of the build plate. I have never been able to print on the left third of the build plate but used to use the other space pretty reliably.
I have previously used only the closest position but am trying out other positions to see if that will help so far with no luck. I really could use some suggestions on how to proceed.
I have hit a frustration level now where my prints have steadily degraded where I am having difficulty printing evven a 1" circle in the middle of the build plate. I have never been able to print on the left third of the build plate but used to use the other space pretty reliably.
I have previously used only the closest position but am trying out other positions to see if that will help so far with no luck. I really could use some suggestions on how to proceed.