Page 2 of 2
Re: Open source LCD resin printer
Posted: Thu Oct 06, 2016 1:49 am
by dragokirov
Still I have not a good quality printing. The reasons were in the z axis, in the resin / forgot to mix it / and in the vat. The main is that the vat is directly on the display and have no distance. I hope today to have a success if I have enough time.
Drago
Re: Open source LCD resin printer
Posted: Thu Oct 06, 2016 2:03 am
by dragokirov
[quote="hp_
" but cure times are ~25 seconds per layer
cheers,
hp[/quote]
As I wrote you, forget everything you know about LCD printers
Re: Open source LCD resin printer
Posted: Thu Oct 06, 2016 11:49 am
by dragokirov
From today
1,5 seconds for 50 microns thickness- poor quality
1 second for 50 microns thickness- started much better but the LCD controller died (((
Re: Open source LCD resin printer
Posted: Thu Oct 06, 2016 12:52 pm
by mypeo
very interesting project. I will follow your progress
Re: Open source LCD resin printer
Posted: Mon Oct 10, 2016 7:16 am
by Bigguy
Drago, what happened to the special non-sticking film you were developing for the VAT?
It's been such a long time that you shared any updates.