Water clear print
Posted: Sun Feb 15, 2015 8:00 am
Hi everyone,
i've been experimenting with some water clear resins, what i've found out is they are extremely hard to print with normal off the shelve projectors.
tweaking my current setup with a custom projector produced these 2 lovely ear buds.
layer thickness = 0.05mm
exposure time = 4.8 sec per layer.
intensity set to 102% on my projector
pull up speed 50
down speed 650
vat - flex vat
cheers,
hp_
i've been experimenting with some water clear resins, what i've found out is they are extremely hard to print with normal off the shelve projectors.
tweaking my current setup with a custom projector produced these 2 lovely ear buds.
layer thickness = 0.05mm
exposure time = 4.8 sec per layer.
intensity set to 102% on my projector
pull up speed 50
down speed 650
vat - flex vat
cheers,
hp_