Gangzhou Tower
Posted: Sun Jan 26, 2014 7:37 am
Hi Everyone, here is my first finished print of the Gangzhou tower, many hours of editing the stl file went into this.
the background of this print is that i wanted to print something you couldn't print with an fdm.
This particular model has a mesh arround the building that i wanted to print.
some more information about this building can be found here:
i've downloaded part from the google maps 3d model lib. and altered the thickness of the mesh.. using several tools(sketchup, netfabb, creation workshop beta 1.3 for slicing)
the model was printed at 0.1mm layer thicknes and lasted ~420minutes,exposure time per layer ~4.2-5.2 sec) i've been randomly increasing exposure time during the print.
here is the print just after it was finished
hp_
the background of this print is that i wanted to print something you couldn't print with an fdm.
This particular model has a mesh arround the building that i wanted to print.
some more information about this building can be found here:
i've downloaded part from the google maps 3d model lib. and altered the thickness of the mesh.. using several tools(sketchup, netfabb, creation workshop beta 1.3 for slicing)
the model was printed at 0.1mm layer thicknes and lasted ~420minutes,exposure time per layer ~4.2-5.2 sec) i've been randomly increasing exposure time during the print.
here is the print just after it was finished
hp_