Top down Failure print
Posted: Wed Nov 25, 2015 10:19 pm
Hi Folks,
i got this failure at my last print as shown in photo.
Resin is LV SpotA
Printing condition:
layer thickness = 0.1
curing time = 8s
bottom =18s
blank = 5s
Z lift = 1
speed = 100
Model: sphere 3x3x3 cm
i got this failure at my last print as shown in photo.
Resin is LV SpotA
Printing condition:
layer thickness = 0.1
curing time = 8s
bottom =18s
blank = 5s
Z lift = 1
speed = 100
Model: sphere 3x3x3 cm