Hi Folks,
i got this failure at my last print as shown in photo.
Resin is LV SpotA
Printing condition:
layer thickness = 0.1
curing time = 8s
bottom =18s
blank = 5s
Z lift = 1
speed = 100
Model: sphere 3x3x3 cm
Top down Failure print
-
- Posts: 9
- Joined: Tue Oct 13, 2015 9:35 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Top down Failure print
anyone can help to identify this problem ?
-
- Posts: 128
- Joined: Wed Jan 22, 2014 1:31 am
- Location: LOS ANGELES [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Top down Failure print
It’s Quite clear, that the polymer is contaminated; Or it can be the shelf life of your media and lacks; in exposer, or the subject is out of focus.