I'm sure this is something bone-headed.
I watched the LittleRP printing, and this is how it is using its time:
- projector is on: about 3.5 seconds
- build plate raises and lowers: about 4.5 seconds
- delay with nothing happening: 8 seconds
So, the prints are taking about twice as long as they need to.
I've attached my slicing profile. Any idea what I'm doing wrong?
Mysterious delays during printing
Re: Mysterious delays during printing
Have you clicked the Auto Calc button since making changes?
Research Chemist
-
- Posts: 159
- Joined: Thu Jan 01, 2015 2:56 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Mysterious delays during printing
it happen to me sometimes. 4 or 5 seconds doing nothing. rebooting computer do the trick.
-
- Site Admin
- Posts: 126
- Joined: Wed Oct 22, 2014 3:18 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Mysterious delays during printing
I've also had similar issues fixed by a reboot. I've never had it start mid print though was obviously a problem from the start of the print.
-
- Posts: 78
- Joined: Tue Jun 16, 2015 10:55 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Mysterious delays during printing
I did click Auto Calc.
Fixed with a re-boot. How unfortunate.
Thank you.
Fixed with a re-boot. How unfortunate.
Thank you.