Hey Achingbrain,
I recently got NanoDLP working on my LittleRP2 Extended with the help of Brad. Here are some screenshots of the settings I am currently using. For some reason on my Raspberry Pi 3 I have to unplug/plug in the LittleRP2 via USB, then refresh the setup screen for it to connect via Ramps. I am not sure what is going on there, but it happened on both a Raspberry Pi 2 and 3.
Also, when you connect the default Z-Axis buttons don't play very nice with the RP2 (due to NanoDLP using pulses). So you might want to add a few buttons on that screen to control.
Setup:
Example profile:
Custom Buttons:
Hope this helps!
NanoDLP and the LittleRP2
-
- Posts: 3
- Joined: Thu Jul 21, 2016 1:31 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: NanoDLP and the LittleRP2
These settings helped connect me to the RAMPS board on my littleRP but I haven't managed to properly control a print. The projector turns on and off accordingly, but the platform doesn't move. Any idea what I might be doing wrong? I've got a different build of NanoDLP running on my Raspberry Pi 3, so some of the settings options are a little different.
-
- Posts: 9
- Joined: Sun Mar 08, 2015 1:39 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: NanoDLP and the LittleRP2
On the setup screen the commands for the projector are not fully visible. Could anyone post the comple command codes?
Thanks in advance, Kai
Thanks in advance, Kai