Page 1 of 1
over curing in x,y directions
Posted: Fri Jul 24, 2015 4:30 am
by pouryatorabi
Hi everyone.
I have a problem and I don't know how to solve it. It seems whatever I do, My projector over cures my parts in the x,y direction. Can anyone help me with it?
Re: over curing in x,y directions
Posted: Fri Jul 24, 2015 8:38 am
by pouryatorabi
can anyone help me, when I print a layer I expect to get something like this :
but what I get is :
The grey parts are a little thinner but they exist, and when I print a part, it causes the model not to be smooth enough.
I'm sure I've calibrated it well and the problem is from projector and I don't know how to solve it.
Re: over curing in x,y directions
Posted: Fri Jul 24, 2015 12:01 pm
by PacManFan
have you tried reducing the exposure time?
Re: over curing in x,y directions
Posted: Fri Jul 24, 2015 12:17 pm
by sgraber
I agree: decrease your exposure time.
Re: over curing in x,y directions
Posted: Fri Jul 24, 2015 12:20 pm
by pouryatorabi
Yes I did. But the parts will fall.
Re: over curing in x,y directions
Posted: Fri Jul 24, 2015 5:06 pm
by Taher1360
Hi
A lot of things can cause this, please give more info about resin, curing time, projector and slicing software,
It can be solve, don't worry!