HELLO EVERYONE
I AM NEW IN PRNTER LCD., (KLD-LCD1260)
I HAVE A JEWELRY, AND I NEED TO MAKE SEVERAL WORKS WITH LOGOS THAT HAS SMALL LETTERS. MY QUESTION AS I CONFIGURE THE MACHINE TO GET OUT WITH GOOD RESOLUTION AND PRINT BEST QUALITY.??///
I LEAVE SOME PICTURES OF THE DESIGN. THE LETTERS GO OUT MOVED. ARE NOT DEFINED. I NEED YOUR HELP ,
THANK YOU VERY MUCH IN ADVANCE.
KLD-LCD1260 RESOLUTION
-
- Posts: 2
- Joined: Mon Jun 26, 2017 5:24 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: KLD-LCD1260 RESOLUTION
The only thing I can think of that would cause this is there are errors in your STL file that are causing Creation Workshop to misread the STL data during the slicing operation.
Maybe you can try repairing the STL file by uploading it here. https://tools3d.azurewebsites.net/ You'll need a Microsoft account. Also, after any repairs are done it will let you download a 3MF file. From there you will need to to have the free Microsoft 3D Builder software to load in the 3MF file and then export it as an STL file.
If you don't want to do all that you could send me the file at info@universebecoming.com and I can take a look at it for you.
Maybe you can try repairing the STL file by uploading it here. https://tools3d.azurewebsites.net/ You'll need a Microsoft account. Also, after any repairs are done it will let you download a 3MF file. From there you will need to to have the free Microsoft 3D Builder software to load in the 3MF file and then export it as an STL file.
If you don't want to do all that you could send me the file at info@universebecoming.com and I can take a look at it for you.
I prefer to know nothing about everything rather than everything about nothing.
-
- Posts: 2
- Joined: Mon Jun 26, 2017 5:24 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: KLD-LCD1260 RESOLUTION
THANK YOU FOR ANSWERING, TRY TO DO WHAT YOU TOLD ME BUT I DO NOT WANT TO UPLOAD THE FILE. WHAT I DID WAS DOWNLOAD THE BUILDER microsofT AND I MAKE REPAIR AND BAD NEWS I DOING DOING THE SAME.
I LEAVE THE FILE TO GIVE YOU A LOOK. I THINK THAT THE MACHINE DOES NOT GIVE THAT QUALITY RESOLUTION / \,
I LEAVE THE FILE TO GIVE YOU A LOOK. I THINK THAT THE MACHINE DOES NOT GIVE THAT QUALITY RESOLUTION / \,
Re: KLD-LCD1260 RESOLUTION
I received your STL and I'll take a look at it when I get a chance.
I prefer to know nothing about everything rather than everything about nothing.
-
- Posts: 25
- Joined: Sat Jan 07, 2017 10:27 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: KLD-LCD1260 RESOLUTION
I found aliexpress amazing 10.1 inches printer which cost only $700 for 11.11 shopping festival .
https://www.aliexpress.com/item/11-11-B ... 02833.html
https://www.aliexpress.com/item/11-11-B ... 02833.html