Build Your Own SLA/SLS

PacManFan where do you have released the source of the lasershark plugin?

HI PacManFan, Finally CW connect Laser shark with ramps1.4 board or with two step motor board from http://macpod.net/electronics.php. If you connect with ramps 1.4 and use sprinter firmware . please tell me which pin to connect between Lasershark and ramps 1.4 board. I buy Laser shark and two step ...

Hi, stimpy, I have read this post "D1 is the USR2 LED. This toggles on or off whenever a sample packet is received. If it remains off or appears "brighter" it is because the computer has momentarily stopped sending data to the LaserShark.Debugging this is going to be extremely diffic...

Hi guys, I tested latest CW build for Lasershark (1.0.0.33) and I am still getting some artifacts: https://drive.google.com/file/d/0B2mvAuXuxQ6BNkNhcHZjMW9EdHc/edit?usp=sharing The slice contains only bright pixels - laser is scanning entire area. Artifacts are not present at all scan-lines. When t...

Hi guys, I tested latest CW build for Lasershark (1.0.0.33) and I am still getting some artifacts: https://drive.google.com/file/d/0B2mvAuXuxQ6BNkNhcHZjMW9EdHc/edit?usp=sharing The slice contains only bright pixels - laser is scanning entire area. Artifacts are not present at all scan-lines. When t...

I have make movie also with latest software and lasershark plugin but not in resin atm.
Got a gab between the two lines don't know what that is somebody know what it is.

https://www.dropbox.com/s/6fq90kwf71wzx ... 4.mp4?dl=0

Greetings.

Hello me and a friend wanna make a 3D SLx printer only got the hardware at the moment to test. I will give info about that setup i have got and when i got info of the machine build i post it in here. Info of the Hardware ---------Controlboards--------- Board that we use to control the laser is a Las...

DanielM try channel B or C that wil work i think.

Yeah think we got same laser module here you got link of the laser i have got.

http://ls3dp.spice.net.au/index.php?tit ... ware_Laser