How to move CW stepper motors?

Here is the place to discuss software and related tools for Slice generation, machine control, & etc...
User avatar
cncbasher
Posts: 54
Joined: Sun Nov 02, 2014 10:09 am
Location: uk
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby cncbasher » Sun Nov 23, 2014 4:03 pm

do not worry the scripts you have will work with any version of CW .

what shield are you using ? on your arduino if any
it is important to have your drivers correct FIRST if not then motors may not always work ...
so have your stepper drivers set to 16 ...
set the correct steps per 0.1 in your arduino code if you are not sure ask
are your steppers 0.9 or 1.8 deg types ? THIS is Again Important ? for the above
have you any switches connected ?


disconnect enable + from arduino pins 4 & 7
in machine config select default_sla in all profiles
select print display device press apply
machine type uv_dlp
load stl , slice
then press connect button to connect to arduino and play button should now show active

dalaura10
Posts: 50
Joined: Mon Nov 10, 2014 1:26 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby dalaura10 » Wed Nov 26, 2014 10:12 am


dalaura10
Posts: 50
Joined: Mon Nov 10, 2014 1:26 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby dalaura10 » Wed Nov 26, 2014 10:19 am

erro no cw
Attachments
erro tela cw.png

User avatar
cncbasher
Posts: 54
Joined: Sun Nov 02, 2014 10:09 am
Location: uk
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby cncbasher » Wed Nov 26, 2014 1:38 pm


dalaura10
Posts: 50
Joined: Mon Nov 10, 2014 1:26 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby dalaura10 » Thu Nov 27, 2014 9:08 am


User avatar
cncbasher
Posts: 54
Joined: Sun Nov 02, 2014 10:09 am
Location: uk
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby cncbasher » Thu Nov 27, 2014 9:29 am

to center stl after slicing
once you have loaded your stl to centeralise press move button and then centre object button
this will re-center the object

dalaura10
Posts: 50
Joined: Mon Nov 10, 2014 1:26 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby dalaura10 » Thu Nov 27, 2014 9:25 pm


User avatar
cncbasher
Posts: 54
Joined: Sun Nov 02, 2014 10:09 am
Location: uk
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby cncbasher » Fri Nov 28, 2014 5:45 am

Attachments
sidewinder.rar
(928 Bytes) Downloaded 756 times

User avatar
PacManFan
Site Admin
Posts: 633
Joined: Sun Dec 01, 2013 11:44 am
Location: Ahead of the curve
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby PacManFan » Fri Nov 28, 2014 12:00 pm

What machine are you using, what's the size of the projector? It sounds like a mechanical projector offset issue.

dalaura10
Posts: 50
Joined: Mon Nov 10, 2014 1:26 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: How to move CW stepper motors?

Postby dalaura10 » Sat Nov 29, 2014 6:45 am



[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable