Hi all, I'm having trouble curing SubG+
As a test, I'm putting a drop of resin on my build platform and waiting for it to cure with the projector at full blast white, on the bright setting (308W). I've left it for over a minute and it's still soft. If I hold the drops a few inches away from the projector, they will cure in a few seconds, but the projector can't focus that close.
From the build plate to the projector is about 10" with a 45* front surface mirror. Top down build.
The projector is an Optoma HD2200.
Am I doing something wrong or is the projector just not putting out enough UV?
Thanks,
Vaughan
Trouble Curing SubG+
-
- Posts: 115
- Joined: Sun Jun 15, 2014 8:49 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
-
- Posts: 301
- Joined: Tue Dec 24, 2013 10:25 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Trouble Curing SubG+
Hi,
from what i hear, Projectors must have 2200 Lumen or more to be effective..
your projector is 1900 ANSI lumens.
Kind regards,
hp
from what i hear, Projectors must have 2200 Lumen or more to be effective..
your projector is 1900 ANSI lumens.
Kind regards,
hp
-
- Posts: 115
- Joined: Sun Jun 15, 2014 8:49 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Trouble Curing SubG+
Bummer...I guess I will try pico with UV led then...
-
- Posts: 277
- Joined: Fri Jan 31, 2014 12:56 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Trouble Curing SubG+
That's not actually correct, I have a test bed with a Optoma HD65 which is 1600 lumens with a end of life lamp and it will cure resin fine. It did however need a mod to focus closer and the color wheel removed or it would not cure resin properly.
So OP if you haven't removed the color wheel I would do so, you need to remove it from the light path and still have it connected and working. I was able to place mine to the side and fasten it down out of the way.
Also what is your focal distance for the resolution you are trying to cure? I found I had to put a spacer between the inner and outer lens to shorten the distance, it was over 300mm focal now around 250mm which made a very big impact in exposure times.
So OP if you haven't removed the color wheel I would do so, you need to remove it from the light path and still have it connected and working. I was able to place mine to the side and fasten it down out of the way.
Also what is your focal distance for the resolution you are trying to cure? I found I had to put a spacer between the inner and outer lens to shorten the distance, it was over 300mm focal now around 250mm which made a very big impact in exposure times.
-
- Posts: 115
- Joined: Sun Jun 15, 2014 8:49 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Trouble Curing SubG+
Ahh, thanks for the info guys. Maybe I'll try to find a broken projector online (or pico) to salvage, dont want to wreck this one. Also I have an old LCD screen lying around I'll test if that will let UV light through.
-
- Posts: 115
- Joined: Sun Jun 15, 2014 8:49 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Trouble Curing SubG+
ah well, thanks for saving me the time. I'm still interested in Pico though...do you think its better to just usea 20W UV in or 3 5w leds where the old ones were?
-
- Posts: 41
- Joined: Sun May 18, 2014 10:33 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Trouble Curing SubG+
Has anyone managed a mod of a mercury lamp projector to use UV LEDs? Even giving the LEDs their own power supply, I guess you'd have to trick the projector into thinking the lamp was still connected, but there should be a way.
Regarding the question about single or multiple UV LEDs, I imagine the best is to remove the dichroic mirrors and use a single LED, but I'm not expert.
Regarding the question about single or multiple UV LEDs, I imagine the best is to remove the dichroic mirrors and use a single LED, but I'm not expert.
-
- Posts: 19
- Joined: Tue Feb 25, 2014 5:56 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable