I'm still trying to figure this out. From what I have read the Acer H6510BD (1920x1080 pixels) has a transparent (white/clear) color wheel segment (RGBCMY) which I think allows more specified lumen output. I'm guessing that the transparent (white/clear) segment is why you don't need to remove the color wheel. But the color wheel has only 6 segments, so I don't know where the clear segment comes from.
and Acer SpectraBoost offers a wider color gamut via a patented color-wheel coating, which boosts color saturation an extra 30 percent.
http://us.acer.com/ac/en/US/press/2013/55716
I'm curious if the coating on the color wheel is blocking UV?
RGBCYW has greater lumen output than RGBRGB
http://www.projectorcentral.com/benq_w1 ... review.htm
Acer H6510BD
Color Brightness: 580 lumens
White Brightness: 3000 lumens
http://www.colorlightoutput.com/search
single-chip DLP projectors sometimes include a white (clear) segment in the color filter wheel to increase the peak white level, and some filter wheels also include segments with one or more of the secondary colors (yellow, cyan, magenta). Therefore, when you add the maximum levels of red, green, and blue, the result is lower than the measured peak white level, because those extra segments are not used in the RGB measurements, whereas they are used in the white measurement.
http://www.avsforum.com/t/1451895/epson ... t-ces-2013
Usable projector list + hacks
-
- Posts: 102
- Joined: Wed Dec 04, 2013 3:39 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Usable projector list + hacks
thanks alot, i´ll try to get my hands on one of these.
-
- Posts: 9
- Joined: Thu Aug 07, 2014 11:10 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Usable projector list + hacks
I still wanna know which projector is the best choice for a DLP printer?
-
- Posts: 6
- Joined: Thu Jul 03, 2014 2:47 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Usable projector list + hacks
I really don't think there is such thing as "best projector", each projector will fit better to a specific combination of resin/size/etc. But i do believe that h65 seems a good choice.
-
- Posts: 9
- Joined: Thu Aug 07, 2014 11:10 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Usable projector list + hacks
Thanks, I will try it.
-
- Posts: 21
- Joined: Sun Oct 12, 2014 9:55 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Usable projector list + hacks
I have an Optoma EP758 (1024x768 -- I know, I know)
I want to replace the lamp with a UV LED. I've been trying to figure out what I need to ground/bridge on the lamp driver module connector in order for the projector to think the lamp is still in the machine and working.
Any ideas?
I want to replace the lamp with a UV LED. I've been trying to figure out what I need to ground/bridge on the lamp driver module connector in order for the projector to think the lamp is still in the machine and working.
Any ideas?