5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

This is the place to discuss various hardware. Topic include:
- Display devices (Projectors, Lasers & etc..)
- Microcontrollers & RAMPs boards
- Power supplies
- Z-Axis and Tilt assemblies
- etc..
Makarije78
Posts: 2
Joined: Wed Feb 01, 2017 1:48 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Makarije78 » Wed Feb 01, 2017 1:53 pm

Hi guys!

I am really new to this things and have just received printer with rapsberry pi .
Printer has only ethernet connection as it is sufficient for this version I hope?
Please if someone could help me with some instructions , driver etc how to connect printer with PC (ofxourse I pluggeg ethernet cable both in computer and printer) but can't find printer in control panel.

I am using Win 10.

Thank you in advance.

laopa
Posts: 5
Joined: Thu Feb 02, 2017 2:57 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby laopa » Thu Feb 02, 2017 3:57 am


Mechatroiker
Posts: 2
Joined: Wed Feb 01, 2017 5:52 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Mechatroiker » Thu Feb 02, 2017 4:40 am

Hey Guys,

I am looking for a new SLA/DLP-Printer.
I work with some different 3D printing processes. I also built a view different (FDM) Printer in the last time but i have no skills with SLA. Now i want to discover the SLA world. :)

So my question is, what is the over all result for this Printer?
Would you buy it again? What are the pro and cons?
Is it easy to use/ to install? Driver? Programms? :?:

Or is it better to build an own one with an LCD (but i don´t have so much time for this...)


Thanks a lot!!!!! :)


Greats from Bavarian

LacoDeLoco
Posts: 23
Joined: Sat Jan 14, 2017 2:30 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby LacoDeLoco » Thu Feb 02, 2017 1:57 pm

Hello Laopa

Nice user guide.

Thx

Laco

Cabo
Posts: 16
Joined: Wed Sep 09, 2015 8:06 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Cabo » Sun Feb 05, 2017 4:54 am

Hi guys,
These are my 35 micron printing tests with my modified YHD-101 (50W uv led). Layer time was 4.5sec it was printing for 3 hours.
The base under the head is around 7cm long. Resin is FTD IB primed with a light coat of grey primer.

DSC09046x.jpg

DSC09048x.jpg

Odd
Posts: 34
Joined: Sun Dec 04, 2016 5:48 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Odd » Sun Feb 05, 2017 6:49 am

Great print!!!

Really like the model too...

..is your scan ?

..or a zbrush model ??

//O.

LacoDeLoco
Posts: 23
Joined: Sat Jan 14, 2017 2:30 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby LacoDeLoco » Sun Feb 05, 2017 11:21 am

Very nice work
(50W, and the print too)

LAco

Oscar
Posts: 12
Joined: Thu Dec 22, 2016 5:50 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Oscar » Sun Feb 05, 2017 11:52 am

Wow that's a vey nice print Cabo!

Cabo
Posts: 16
Joined: Wed Sep 09, 2015 8:06 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Cabo » Sun Feb 05, 2017 1:23 pm

Hi Odd, it is a Zbrush model. Made for a game called Hellblade, done by some talented artists at Ninja Theory. I'm working on a bust that hopefully will see the light when the game comes out.

mandrea
Posts: 36
Joined: Thu Apr 23, 2015 1:57 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby mandrea » Sun Feb 05, 2017 4:41 pm

Cabo beautiful printing and 3d model also, congratulations,
I contacted James to ask for an update on the new model, and if it is available for the model that we use, improved Z axis (maybe HIWIN) because this printer deserves the best


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable