SimplySla by Goldi80

Let' see your handiwork!
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
goldi80
Posts: 56
Joined: Sat Feb 22, 2014 8:34 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

SimplySla by Goldi80

Postby goldi80 » Wed Nov 23, 2016 8:08 pm

Simply Sla by Goldi80 use ramps 3 stepper and Repetier

the print are very good next is to make case for it
20w uv laser 0.05 dot
speed 200mm/s i will go 400 wen i make better shell

it works and is good cheap

For one model 25u i have 50min z lift and 1.20h print total 2.3h per print i like it.
Try any dlp and sla resin all work the same.

https://youtu.be/oASrp-KSkAk
Attachments
SimplySLA.jpg

goldi80
Posts: 56
Joined: Sat Feb 22, 2014 8:34 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: SimplySla by Goldi80

Postby goldi80 » Thu Nov 24, 2016 6:06 am

viewtopic.php?f=13&t=5019

Whit senertec resin
Attachments
unnamed.jpg

goldi80
Posts: 56
Joined: Sat Feb 22, 2014 8:34 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: SimplySla by Goldi80

Postby goldi80 » Tue Dec 06, 2016 5:37 am


hp_
Posts: 301
Joined: Tue Dec 24, 2013 10:25 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: SimplySla by Goldi80

Postby hp_ » Tue Dec 06, 2016 12:51 pm

Hi goldi80,

Looking great!

cheers,
hp

goopyplastic
Posts: 236
Joined: Sat Mar 29, 2014 6:16 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: SimplySla by Goldi80

Postby goopyplastic » Tue Dec 06, 2016 12:59 pm

Really great work, let me know if I can help in any way.

Mr. LittleRP

goldi80
Posts: 56
Joined: Sat Feb 22, 2014 8:34 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: SimplySla by Goldi80

Postby goldi80 » Tue Dec 06, 2016 5:58 pm

My case or shell is not screw i put some ca glue to hold it really dont i order new plexi it will be screw all Pieces in 10mm plate
this is no good and belt is lose and not event is prototype.
i do not have 32t pulley now is slow 2x. order for banngood it will take forever to come
i need to put 32t now it have 16t 200steps need to be 100steps 1/16 then is real fast and the arduino breath no calculation the weight is 22g laser and holder -

the problem is slicer dot or line from photo to gcode or .slc if you dont complicate gcode i get good small size txt and print. laser is hard to move proper

Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable