photos of a 3d print made on my updated printer

Let's see some prints you've made with some of your hardware.
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
HTL
Posts: 101
Joined: Thu Feb 06, 2014 3:19 pm
Contact:

photos of a 3d print made on my updated printer

Postby HTL » Sat Feb 15, 2014 8:35 pm

The 3d print is 86mm X 70mm X 19mm without the supports. The layers you see are 0.1mm thick.

3d print image 100_1774.jpg


3d print image 100_1776.jpg


technical details can be found at http://projectsinterestsandetcetera.com/

watsonstudios
Posts: 52
Joined: Mon Jan 13, 2014 7:34 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: photos of a 3d print made on my updated printer

Postby watsonstudios » Sat Feb 15, 2014 11:10 pm

Clean print! I'd be curious to see the underside once the supports are removed. Usually the underside of prints (the sides facing the build plate) tend to get a little bumpy from the resin not curing at consistent depths. A problem I hope can be solved with better resins in the future.

Thanks for sharing!

hp_
Posts: 301
Joined: Tue Dec 24, 2013 10:25 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: photos of a 3d print made on my updated printer

Postby hp_ » Sun Feb 16, 2014 6:09 am

Hi HTL,
I read your blog with much interest!

very nice blog, and nice print,

the light source in you projector is not UV is it?

Cheers,
hp

HTL
Posts: 101
Joined: Thu Feb 06, 2014 3:19 pm
Contact:

Re: photos of a 3d print made on my updated printer

Postby HTL » Sun Feb 16, 2014 11:52 am

No, the projector light source is not uv. The projector is a totally unmodified (with the exception of a +4 closeup lens for close focusing) toshiba T95.

Finhead
Posts: 277
Joined: Fri Jan 31, 2014 12:56 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: photos of a 3d print made on my updated printer

Postby Finhead » Sun Feb 16, 2014 8:33 pm

So your curing the resin with the color wheel intact and fully untouched projector (besides the lenses). Thought that wouldn't work properly?

User avatar
258cj7
Posts: 31
Joined: Mon Jan 06, 2014 9:38 pm
Location: Kentucky, USA
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: photos of a 3d print made on my updated printer

Postby 258cj7 » Sun Feb 16, 2014 8:43 pm

I'm also using a projector with the color wheel intact. The only mod was to the focus ring. Cure time for MakerJuice SubG+ is 5.5 seconds.
Mitsubishi XD430U 1024x768 native 230w UHP bulb


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable