Few more test prints with FTD, exposure times are still not right.
Frog is 75 microns, Zombie Killer and Devil are at 50 microns. ZK is shelled to 1mm Devil is solid printed at the same time. Last pic is for scale, they are sitting on my Galaxy S4 phone.
Clinton
More FTD prints
-
- Posts: 18
- Joined: Mon Mar 10, 2014 12:42 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: More FTD prints
Nice.
-
- Posts: 277
- Joined: Fri Jan 31, 2014 12:56 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: More FTD prints
Thanks, starting to get the hang of this resin printing.
One more last night, Q-Sil was getting worn before this print. The towers didn't turn out as they stuck to the VAT about 20% in on each one. But the rest of the print turned out pretty nice. 50 micron Z 3.5 Anti-Alising total length of the print 96mm, the small window pillars are .3mm the large ones are .7mm so it does print detail pretty good so far.
Clinton
One more last night, Q-Sil was getting worn before this print. The towers didn't turn out as they stuck to the VAT about 20% in on each one. But the rest of the print turned out pretty nice. 50 micron Z 3.5 Anti-Alising total length of the print 96mm, the small window pillars are .3mm the large ones are .7mm so it does print detail pretty good so far.
Clinton
-
- Posts: 29
- Joined: Tue Feb 25, 2014 4:15 am
- Location: Roma (Italy) [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: More FTD prints
Very nice.
-
- Posts: 277
- Joined: Fri Jan 31, 2014 12:56 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: More FTD prints
Thanks.
And last of the test prints I think this is as far as I can go with tweaking this printer unless I go finer XY resolution.
30 micron Z 100 micron XY 3.5 Anti-Aliasing 3.8 sec exposure time 42mm tall and as far as I can tell it printed perfect.
Clinton
And last of the test prints I think this is as far as I can go with tweaking this printer unless I go finer XY resolution.
30 micron Z 100 micron XY 3.5 Anti-Aliasing 3.8 sec exposure time 42mm tall and as far as I can tell it printed perfect.
Clinton
-
- Posts: 16
- Joined: Wed Mar 05, 2014 2:31 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: More FTD prints
Very Nice! Can't wait to start going on mine.
-
- Posts: 51
- Joined: Wed Feb 26, 2014 2:24 pm
- Location: Colorado
- Contact:
Re: More FTD prints
Very nice indeed, the rook is perfect!