Slimer
Posted: Sun Mar 30, 2014 12:52 pm
Had time to do another print yesterday, still working out the kinks on the new build but it's def working as good or better than I had hoped.
Printed atZ at 30 microns 100 micron XY and 515 layers. Took approx 1.5hrs with a exposure time of 3.5sec and total layer time of 10.4 sec.
Last pic is for scale he is sitting on a quarter, and I really need to figure out the supports in resin based printing I added way too many so the back looks like bad.
Clinton
Printed atZ at 30 microns 100 micron XY and 515 layers. Took approx 1.5hrs with a exposure time of 3.5sec and total layer time of 10.4 sec.
Last pic is for scale he is sitting on a quarter, and I really need to figure out the supports in resin based printing I added way too many so the back looks like bad.
Clinton