SimplySla by Goldi80

[goldi80]

Simply Sla by Goldi80 use ramps 3 stepper and Repetier

the print are very good next is to make case for it
20w uv laser 0.05 dot
speed 200mm/s i will go 400 wen i make better shell

it works and is good cheap

For one model 25u i have 50min z lift and 1.20h print total 2.3h per print i like it.
Try any dlp and sla resin all work the same.

https://youtu.be/oASrp-KSkAk

[goldi80]

viewtopic.php?f=13&t=5019

Whit senertec resin

[goldi80]

new video



https://youtu.be/Arkomuloiyk

[hp_]

Hi goldi80,

Looking great!

cheers,
hp

[goopyplastic]

Really great work, let me know if I can help in any way.

Mr. LittleRP

[goldi80]

My case or shell is not screw i put some ca glue to hold it really dont i order new plexi it will be screw all Pieces in 10mm plate
this is no good and belt is lose and not event is prototype.
i do not have 32t pulley now is slow 2x. order for banngood it will take forever to come
i need to put 32t now it have 16t 200steps need to be 100steps 1/16 then is real fast and the arduino breath no calculation the weight is 22g laser and holder -

the problem is slicer dot or line from photo to gcode or .slc if you dont complicate gcode i get good small size txt and print. laser is hard to move proper

Regards