5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

This is the place to discuss various hardware. Topic include:
- Display devices (Projectors, Lasers & etc..)
- Microcontrollers & RAMPs boards
- Power supplies
- Z-Axis and Tilt assemblies
- etc..
zoom
Posts: 27
Joined: Mon Dec 01, 2014 12:39 pm
Location: Italy
Contact:

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby zoom » Thu Apr 06, 2017 2:34 pm

Hy Cabo,i see that the 50Watt 405UV led that i can install in the printer has a 36volt power supply insted of the original one that has 12volt.
So how can i connet the new one on the board to have the on/off signal??

Thank you
Francesco

carlosx01
Posts: 12
Joined: Wed Mar 29, 2017 5:47 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby carlosx01 » Thu Apr 06, 2017 5:10 pm

It is not glue in connector.
When the diplay failed function I must connector (HDMI) take out of raspberry and then back and sometimes is it good sometimes not... it can be display board... now after many ours of testing I can say display failing not depend from temperature I think that can be display driver or low power on display driver ( is powered from arduino board)
many times this fail happend when I start printing (printer is cold)
I dont know this problem need more testing ant time...
but I have lot on work....
sorry for my English...
Karel

Cabo
Posts: 16
Joined: Wed Sep 09, 2015 8:06 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Cabo » Fri Apr 07, 2017 1:34 am

Hi Francesco,
Basically, I've reconnected everything like in the original and swapped the led driver to a 50W one.

carlosx01
Posts: 12
Joined: Wed Mar 29, 2017 5:47 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby carlosx01 » Sat Apr 08, 2017 3:46 am

Hi all.
I was replace HDMI cable with new one and problem with display is fixed I hope.
I test print but I make something wrong.
I use resin from senetrek from Turkey and funtodo resin from China and result is the same.
For first 3 layers 120000 ms thicknes 0,025mm and for normal layer time from 10 to 25 sec and thicknes 0,025mm. Resin in the first layers stick on base platform perfect but the next layers are standing down on the foil..
Karel

paul
Posts: 25
Joined: Sat Jan 07, 2017 10:27 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby paul » Sat Apr 08, 2017 9:06 pm

@Karel

lower the exposure time to 9s , also check the lift speed
Those depends on the object size you will print

carlosx01
Posts: 12
Joined: Wed Mar 29, 2017 5:47 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby carlosx01 » Tue Apr 11, 2017 4:55 pm

Hi guys
all the problems are solved. Printer works well. Prints are perfect. Two weeks of troubles and now is all working good
(change two cables many times reinstal software and lot of unsuccessful prints)
maybe faulty piece of this printer...
for funtodoo cast I use for first 2layers time 60seknds and then 8,5 seknds for layer 0,050mm thick
for senertec cast I use for first 2layers time 120 seknds and then 12 seknds for layer 0,050mm thick
important is lifting before printing next layer 5mm is ok
result ?
this printer is good for this money and prints are perfect but if you are not technical skilled You destroy this printer before first successful print :lol:
now I am happy
thanks all for support
sorry for My english...
Karel

Natali
Posts: 2
Joined: Thu Apr 13, 2017 2:06 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Natali » Thu Apr 13, 2017 2:27 am

Hi
Creation Workshop does not see the printer. I have an updated version with Pi3
Resin sticks to the platform and Teflon
From the LogBindle file in the printer.
Not the correct settings in my opinion
Attachments
E.jpg
112.JPG

Natali
Posts: 2
Joined: Thu Apr 13, 2017 2:06 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby Natali » Thu Apr 13, 2017 2:30 am

Using resin KLD lcd 1260P
You can give parameters to this resin



















p

kostyo
Posts: 13
Joined: Thu Apr 06, 2017 6:13 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby kostyo » Fri Apr 14, 2017 6:31 am

Hi

I'm new here 2 weeks ago I bought this printer
https://www.aliexpress.com/store/produc ... 0.0.v6zMTz

I would like to ask is there anyone who would be willing me to print a file on her already calibrated printer?

I would compare me to see if theres a better option to set it.

Thank you very much for your willingness

carlosx01
Posts: 12
Joined: Wed Mar 29, 2017 5:47 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

Postby carlosx01 » Fri Apr 14, 2017 11:54 am



[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable