Hi Oscar,
arround 6 hours
cheers,
hp
5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
-
- Posts: 7
- Joined: Mon Jan 02, 2017 6:43 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Hi guys, best wishes for 2017.
Sorry to bother you but I've received the Raspberry Pi version of this printer and it just doesn't work. Seems like the microSD card hasn't been well configured. So after some research on internet I've flashed Photonic3D on a SD card of mine (according to the manual it's the software I was intend to use). This time I can acces to the software, but the printer (with all the good presets) isof course not listed, so at this point all my efforts are useless.
I've also tryed to intall Nanodlp but... as a noob it seems that my poor skills are reaching their limits...
So here I am... I was just wondering if someone there could help me, maybe send me an image disk of their Rapsberry's microSD properly set up...
I know you guys here have spent a lot of time trying and tweaking and I come here like asking a plug-and-play solution... but I've spent the last days of my Xmas holidays trying to get the solution by myself, while asking the seller to help me but until now, even if he is friendly, his help just leads to nothing. That's why I'm trying to get some help here.
Thank you.
Sorry to bother you but I've received the Raspberry Pi version of this printer and it just doesn't work. Seems like the microSD card hasn't been well configured. So after some research on internet I've flashed Photonic3D on a SD card of mine (according to the manual it's the software I was intend to use). This time I can acces to the software, but the printer (with all the good presets) isof course not listed, so at this point all my efforts are useless.
I've also tryed to intall Nanodlp but... as a noob it seems that my poor skills are reaching their limits...
So here I am... I was just wondering if someone there could help me, maybe send me an image disk of their Rapsberry's microSD properly set up...
I know you guys here have spent a lot of time trying and tweaking and I come here like asking a plug-and-play solution... but I've spent the last days of my Xmas holidays trying to get the solution by myself, while asking the seller to help me but until now, even if he is friendly, his help just leads to nothing. That's why I'm trying to get some help here.
Thank you.
-
- Posts: 28
- Joined: Mon Jan 12, 2015 2:52 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
I don't have any experience with it, but there is a google plus group for "open sla" and several people there have this printer and could probably help you out.
best of luck
best of luck
-
- Posts: 7
- Joined: Mon Jan 02, 2017 6:43 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
orangezero,
Thanks for the link. Sure I will take a look.
Have a nice day.
Thanks for the link. Sure I will take a look.
Have a nice day.
-
- Posts: 46
- Joined: Fri Dec 16, 2016 3:28 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
-
- Posts: 7
- Joined: Mon Jan 02, 2017 6:43 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Hi everyone,
Finally the seller came to me with an in-depth step-to-step solution to follow. Now the printer works fine <3
Will post prints asap!
Finally the seller came to me with an in-depth step-to-step solution to follow. Now the printer works fine <3
Will post prints asap!
-
- Posts: 5
- Joined: Sat Mar 26, 2016 11:23 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: 5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,
Hi everyone, I have seen the comments, please, I would like to know from whom you bought the printer, I am from Brazil and I saw two or three companies selling on aliexpress, and also on alibaba. It will be my first purchase and I am afraid of making a mistake when it comes to buying. as you already have the printer shows that who you bought is safe. Thank you very much for your help and congratulations for the works shown. I already have a small miicraft now want a larger area with printing, sorry my english, I'm using google translator.