5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

[mandrea]

https://drive.google.com/file/d/0B4QD7f ... sp=sharing

Hello everyone,
I'm new to the club,

  I noticed that the slide z sways sideways (warping), have you also experienced a similar defect, and how you solved,

thanks in advance

[svs]

Dear forum users ;

For this LCD printer , we formulated more reactive resin .....for decrease layer cure times..

when you order resin ;please infrom us about your printer brand for this new formulation

regards

savas from senertek

[hp_]

hi svs,

can you tell us about the cure time per layer on the more reactive resin?

looking forward hearing from you

cheers,
hp

[goldi80]

..0.03mm layers, first 4 layer 120sec, then 10sec using senertek cast red resin. user dd

is making for me new resin maybe it will be better

[svs]

hope ..can be decrease to 1s per layer ( for 0.050mm layer height ) ....
users will test and report ...

[goldi80]

I try 3sek resin i have it prints black area it go through very sensitive resin is no good for LCD if 8sek for 0.035 I think it will be best for printing.
Try 30wat bulb is no good

Like to try matrix led it will be best for expand light and then 5sek per 35u

[goldi80]

[russiangems]

[Odd]

Hey russiangems

I used the settings in the first post here:
https://www.nanodlp.com/forum/viewtopic.php?id=305

...and the latest ( non-beta ) version of nanodlp.

Good luck

//O.

[Odd]