5.5 inch (2560x1440p LCD) with UV LED array for under $600. :Proniks Sla 3d Printer,

[sodium]

some details concerning lcd panel type ? model ? vendor?
there are a lot of 5.5 " panels with control boards in aliexpress with that resolution

https://es.aliexpress.com/item/5-5-inch ... .66.nWucUQ

[Cabo]

Hi,

Anyone tried to swap the leds to more powerful ones and have a link to where to buy them from.
According to the manufacturer of the printer someone is using 2 20w leds instead of the 2 10w leds that
are in my version of the printer.

Any help is appreciated.

[Kvirre]

[goldi80]

Think that we are waiting for shahin to get is 2k printer then it will work.

try to my raspbian pi 1 b 2xUsb try to run nanodlp no way dont work?

i put some paper so dont burn out

[goldi80]

I got mine

and got it whit short contact the screw WATCH OUT

[Cabo]

10 sec exposure with Funtodo IB

Printed with FTD IB at 0.05

Light primer for the details.

[hp_]

for anyone looking for Installation files for this printer,

please follow this link:

cheers,
hp

[goldi80]

Only 10times can download so im 11 did not get (the are fast)

i figure out is M106 S255 to tun led on now is working

Regards

[goldi80]

Do not like this it like it is.

[hp_]

M106 S0 is to turn it off