Hi Folks,
I'm thinking about submerging my z gantry (except the motor) into my vat. the vat will be about 8 to 9 inches deep, and will be filled with glycerine and resin on top (about an inch).
So now my question is: Over time, will glycerine and resin corrode the parts that I am going to submerge?
Here's a list of part that will be submerged:
1. Pillow Block with Bearing:
http://www.aliexpress.com/item/wholesal ... 18400_6151
2. Threaded rod with Brass screw: http://www.aliexpress.com/item/3pcs-T8- ... 50920.html
3. Linear Bearings: http://www.aliexpress.com/item/8pcs-LM5 ... 18400_6151
will resin or glycerine corrode my parts?
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable