Using a magnifying glass
Posted: Mon Oct 26, 2015 10:47 pm
Hello
I projector Benq MX522
Set CW to 50 microns. but CW calibration lines are not sharp, add a magnifying glass.
the image is very good.
This applies to printer bottom-up
A greeting to all and thank you very much for your comments
Pedropin1
I projector Benq MX522
Set CW to 50 microns. but CW calibration lines are not sharp, add a magnifying glass.
the image is very good.
This applies to printer bottom-up
A greeting to all and thank you very much for your comments
Pedropin1