Created an account just so I could show this to you guys.
http://www.instructables.com/id/homemad ... /?ALLSTEPS
looks promising, would something like this work at all with uv leds? if not what kind of modifications would it need?
also I'm a little under informed about gcode controlling the whole set up(motors) and with an lcd printer would you just display svg layers? you could even have a hand operated printer with no gcode, just display svg layers with a stopwatch and then turn a handle to raise/lower the build plate.
lcd projector
-
- Posts: 2
- Joined: Tue Feb 10, 2015 8:41 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
- PacManFan
- Site Admin
- Posts: 633
- Joined: Sun Dec 01, 2013 11:44 am
- Location: Ahead of the curve [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: lcd projector
You're going to need a DLP projector generally. LCD's don't usually work well.
-S
-S
-
- Posts: 2
- Joined: Tue Feb 10, 2015 8:41 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: lcd projector
http://bucktownpolymers.com/zve200-v470.html
I found this and it states: Sensitive enough to cure by the blue light from standard unmodified Pico and Pocket sized LED projectors.
so when you have a projector that can cure resin out of the box, the next step is getting the projector to display the right image. how is that done?
I found this and it states: Sensitive enough to cure by the blue light from standard unmodified Pico and Pocket sized LED projectors.
so when you have a projector that can cure resin out of the box, the next step is getting the projector to display the right image. how is that done?