Page 1 of 1
Thin Air Creation
Posted: Thu Dec 25, 2014 12:44 am
by SIDRANA
Marry Christmas;
Joyous Holiday Season & Happy New Year;
Warm Cheers; To Your Good Health
Saeed
A Thin Air Creation!
DIY Step By Step, Medium Format Stereo Lithographic Printer.
Configuration; Bench Style Open Structure, Interchangeable Integration.
Part-One's-Timeline, about two weeks
a- Concept.
b- Frame design.
c- Bill of material.
d- Purchasing & waiting period for the Stuff to arrive.
e- Fabrication.
f- Assemble.
Re: Thin Air Creation
Posted: Sun Jan 18, 2015 7:46 pm
by SIDRANA
Part One- Update
Running two weeks late.
Finding the proper hardware for 25mm series extrusions is bit of a challenge, here in USA. I made the best fit by utilizing 80/20 30 series brackets by splitting into two units. the whole frame assembly is going to be completed in about two weeks.
A simple DIY jig; and a fixed plunger saw was used to make the precise cuts of extrusions.
Part-One Initial phase partially complete.
Part-Two Controller & Vat
a- Intermediate GLBL Controller & FEP Film Vat Operational.
b- Vat # 3 fabrication timeline few days.
c- Vat # 4 Construction timeline two weeks.
d- All in one; Multi touch screen controller / interface and dedicated computational hardware; Timeline eight weeks.
e- Simultaneously DLP projector light source conversion and custom additions.
Re: Thin Air Creation
Posted: Sat Feb 07, 2015 4:35 pm
by SIDRANA
Complication of Part-one, Photographs, and moving onto the integration
Re: Thin Air Creation
Posted: Sat Feb 21, 2015 8:57 pm
by SIDRANA
This is a sectional Vat, and the FEP film is sandwiched with a gasket. The structure is interchangeable, with a flex or rigid base.
Re: Thin Air Creation
Posted: Sun Mar 08, 2015 1:20 pm
by SIDRANA
Getting Close Photographs;
Re: Thin Air Creation
Posted: Mon Mar 09, 2015 12:54 am
by PomeroyB
Double the printer, double the fun! Nice work.
Re: Thin Air Creation
Posted: Mon Mar 09, 2015 1:19 am
by nicanor76
Beast! Looking good!
Re: Thin Air Creation
Posted: Tue Jun 30, 2015 5:05 pm
by SIDRANA
The Compact Logistical VAT System.
Re: Thin Air Creation
Posted: Wed Jul 01, 2015 6:56 pm
by SIDRANA
Mirror Mount;
Re: Thin Air Creation
Posted: Thu Jul 02, 2015 2:54 pm
by SIDRANA
THORLABS Standoffs & Fastener;