error when slicing printing large stl files
Posted: Wed Jan 28, 2015 7:23 am
I am getting the following errors with large stl files when i try to print or move the slider in the slice view.
CW1.0.0.54 on winXP sp3 running in parallels on mac osx
11:43:52.890> Err : Parameter is not valid.
11:43:52.890> Err : at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format)
at System.Drawing.Bitmap..ctor(Int32 width, Int32 height)
at UV_DLP_3D_Printer.Slicer.SliceImmediate(Single curz, List`1 allIntersections) in E:\PROJECTS\GitHubRoot\UVDLP\UVDLPSlicerController\UVDLP\Software\PC\UV_DLP_3dPrinter\UV_DLP_3D_Printer\Slicing\OldSlicer\Slicer.cs:line 247
attached is a log file of a failed print on the actual system connected to the printer
it is a dual display setup running CW1.0.0.47 on windows vista
the stl file is about 78MBytes
i later tried on a third system running on win7 with more ram and still get the same errors
CW1.0.0.54 on winXP sp3 running in parallels on mac osx
11:43:52.890> Err : Parameter is not valid.
11:43:52.890> Err : at System.Drawing.Bitmap..ctor(Int32 width, Int32 height, PixelFormat format)
at System.Drawing.Bitmap..ctor(Int32 width, Int32 height)
at UV_DLP_3D_Printer.Slicer.SliceImmediate(Single curz, List`1 allIntersections) in E:\PROJECTS\GitHubRoot\UVDLP\UVDLPSlicerController\UVDLP\Software\PC\UV_DLP_3dPrinter\UV_DLP_3D_Printer\Slicing\OldSlicer\Slicer.cs:line 247
attached is a log file of a failed print on the actual system connected to the printer
it is a dual display setup running CW1.0.0.47 on windows vista
the stl file is about 78MBytes
i later tried on a third system running on win7 with more ram and still get the same errors