Page 1 of 1
Test Resin Dialog Box
Posted: Mon Sep 08, 2014 8:52 pm
by firecardenal
Hi Steve.
I've been playing with parameters for the resin test. But do not understand how it works.
Can you explain the correct method?
Re: Test Resin Dialog Box
Posted: Mon Sep 08, 2014 10:14 pm
by PacManFan
It allows you to test multiple exposure settings in a single print. You'll enter the base time in the minimum exposure time box. There are 10 steps/boxes, each step adds the 'exposure step'. This allows you to start with a small time, and work up to a much larger time. After the print is complete, you can examine the model and determine from the boxes which exposure works best for your resin.
Re: Test Resin Dialog Box
Posted: Fri Sep 12, 2014 1:24 pm
by firecardenal
Ok, Steve.
I will try to aply.
Thanks again
Re: Test Resin Dialog Box
Posted: Sat Feb 07, 2015 5:37 am
by JSmith172
woukd it be bettr for each step to have their own square?
Re: Test Resin Dialog Box
Posted: Sun Feb 15, 2015 2:22 pm
by how_eee
+1
that way will be much closer to real print.
Re: Test Resin Dialog Box
Posted: Sun Feb 15, 2015 5:30 pm
by seblos
what kind of press I use?
Sebastiano