Page 2 of 6
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Mon Aug 24, 2015 3:30 am
by shahin
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Tue Aug 25, 2015 4:45 pm
by jkao
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Thu Aug 27, 2015 3:42 am
by Max
I had just a question? What is required for turning the projector on and off? Should I use a Max3232 chip? I also couldn't find which pins are used for projector.
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Thu Aug 27, 2015 2:54 pm
by adambx
Hi,
it looks like a nice piece of software. I haven't been able to try it yet though. I'm using a Trinamic stepper driver for which i'm writing my own firmware.
Is there a possibility to implement a function to send custom serial commands (Ascii or binary) instead of directly controlling the driver?
I really like the function of masking parts of the area while printing! Also waiting for a premultiplied mask to correct exposure issues
Cheers^^
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Fri Aug 28, 2015 5:41 pm
by shahin
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Fri Aug 28, 2015 6:16 pm
by shahin
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Sat Aug 29, 2015 5:02 pm
by adambx
from what i read, you put a lot of thought into the programming. Would it be possible to just use a USB-Serial Converter to support sending serial commands if the PI internal UART sucks? Probably it could be used to further expand support for GCODE Devices, maybe?
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Sun Aug 30, 2015 12:52 am
by Max
Can you give me more details on how to control the projector? whatever I do my projector won't turn on. I should turn it on manually.
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Sun Aug 30, 2015 8:50 pm
by shahin
Re: nanoDLP - Raspberry Pi DLP Host Software
Posted: Sun Aug 30, 2015 8:53 pm
by shahin