Re: Need help with Marlin setup - MIN/MAX confusion and home
Posted: Mon Mar 30, 2015 1:53 pm
Because you are in relative position, so you are telling the Z to move 0.01mm relative to its current location
You want to move down to your 0 so you would need to tell the Z to move G1 Z-111 since you are currently at Z111 after homing.
Also, put the G28 Z0 in your start code so it homes automatically at each start.
You want to move down to your 0 so you would need to tell the Z to move G1 Z-111 since you are currently at Z111 after homing.
Also, put the G28 Z0 in your start code so it homes automatically at each start.