hello
i m owner of b9 mashine
but i want to make my own
want help for modify software to run any dlp projector or lcd
all parts of b9 are easily available
http://www.aliexpress.com/item/Geeetech ... 67978.html
need b9 software modification
-
- Posts: 3
- Joined: Thu Nov 20, 2014 3:58 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
- cncbasher
- Posts: 54
- Joined: Sun Nov 02, 2014 10:09 am
- Location: uk [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: need b9 software modification
i am at a loss what you need , all parts and drawings including the arduino code are available for download , along with the pcb artwork
anyhow let me know what you need .
anyhow let me know what you need .
- PacManFan
- Site Admin
- Posts: 633
- Joined: Sun Dec 01, 2013 11:44 am
- Location: Ahead of the curve [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: need b9 software modification
I've been thinking about adding B9 support for some time. No one has approached me about it before. I can take a look at the API.
-
- Posts: 3
- Joined: Thu Nov 20, 2014 3:58 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: need b9 software modification
b9 sw work with vivitek projectors i need to remove this
i like to try any projector or lcd with software
kast3d also used this software in his 3d printer
sorry for my english
i like to try any projector or lcd with software
kast3d also used this software in his 3d printer
sorry for my english
- cncbasher
- Posts: 54
- Joined: Sun Nov 02, 2014 10:09 am
- Location: uk [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: need b9 software modification
quickreplier:
yes altering the code can be done, and also using CW is an option , with some code written for it (plugin)
however their are many commands used that are projector specific communications , so knowing what projector you wish to change to
would be required , and you would also need to make sure the projector also fits the needs , not only of printing but also has remote capability via the usb or serial port , and that the
command structure of the serial port is known,if not published then you would need to contact the projector manufacturers.
this would be required for every projector you wish to use , so far better to stick to one manufacturer
but modifying it to be able to use any projector is a larger time consuming project, although it can be done
contact me off list if you wish
Dave
yes altering the code can be done, and also using CW is an option , with some code written for it (plugin)
however their are many commands used that are projector specific communications , so knowing what projector you wish to change to
would be required , and you would also need to make sure the projector also fits the needs , not only of printing but also has remote capability via the usb or serial port , and that the
command structure of the serial port is known,if not published then you would need to contact the projector manufacturers.
this would be required for every projector you wish to use , so far better to stick to one manufacturer
but modifying it to be able to use any projector is a larger time consuming project, although it can be done
contact me off list if you wish
Dave
Last edited by cncbasher on Thu Dec 04, 2014 8:43 am, edited 2 times in total.
-
- Posts: 3
- Joined: Thu Nov 20, 2014 3:58 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
-
- Posts: 8
- Joined: Wed Jan 07, 2015 8:00 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: need b9 software modification
I would love to run Titan1 from Kudo3d with B9 software. the projector its using is Acer H6510bd and the motor driver is based on Ramps piggy backing on Arduino.
Thanks
Kim
Thanks
Kim