ChiTu DLP Slicer (supporting export STL)

Here is the place to discuss software and related tools for Slice generation, machine control, & etc...
chitu3d
Posts: 8
Joined: Tue Jan 23, 2018 8:52 am

ChiTu DLP Slicer (supporting export STL)

Postby chitu3d » Tue Jan 23, 2018 11:24 pm

ChiTu DLP Slicer 1.3.4 Support demo.

Image

Video introduction: https://www.facebook.com/groups/104983723495672/permalink/147557442571633/

Image
Image

At present, you can download the 1.3.3 version in our official website:http://www.cbd-3d.com/en/soft/dlpslicer.shtml

chitu3d
Posts: 8
Joined: Tue Jan 23, 2018 8:52 am

Re: ChiTu DLP Slicer (supporting export STL)

Postby chitu3d » Tue Jan 23, 2018 11:29 pm

If anyone has CW format definition or source code, please contact us(support@cbd-3d.com), ChiTu DLP Slicer can be compatible with the CWS format.It is convenient for everyone to use

User avatar
James
Posts: 159
Joined: Mon Dec 02, 2013 1:56 am
Contact:

Re: ChiTu DLP Slicer (supporting export STL)

Postby James » Wed Jan 31, 2018 4:20 pm

How much does the board cost in US dollars?
I prefer to know nothing about everything rather than everything about nothing. :)

chitu3d
Posts: 8
Joined: Tue Jan 23, 2018 8:52 am

Re: ChiTu DLP Slicer (supporting export STL)

Postby chitu3d » Thu Feb 01, 2018 10:24 pm

you mean DLP board?

chitu3d
Posts: 8
Joined: Tue Jan 23, 2018 8:52 am

Re: ChiTu DLP Slicer (supporting export STL)

Postby chitu3d » Thu Feb 01, 2018 10:27 pm

James wrote:How much does the board cost in US dollars?

Image

http://www.cbd-3d.com/en/prod/dlp.shtml

User avatar
James
Posts: 159
Joined: Mon Dec 02, 2013 1:56 am
Contact:

Re: ChiTu DLP Slicer (supporting export STL)

Postby James » Thu Feb 01, 2018 10:31 pm

Yes, the DLP board. Your site doesn't list prices.
I prefer to know nothing about everything rather than everything about nothing. :)

chitu3d
Posts: 8
Joined: Tue Jan 23, 2018 8:52 am

Re: ChiTu DLP Slicer (supporting export STL)

Postby chitu3d » Fri Feb 02, 2018 9:39 am

James wrote:Yes, the DLP board. Your site doesn't list prices.

If you have made the DLP machine before, we can sell it to you. If you haven't done it, it's not recommended, because it's very difficult to do a DLP machine. my Email is : sales@cbd-3d.com ,if you need DLP board ,I can send you PI

rkundla
Posts: 17
Joined: Mon Jul 27, 2015 2:27 pm

Re: ChiTu DLP Slicer (supporting export STL)

Postby rkundla » Tue Apr 10, 2018 7:39 pm

chitu3d wrote:If anyone has CW format definition or source code, please contact us(support@cbd-3d.com), ChiTu DLP Slicer can be compatible with the CWS format.It is convenient for everyone to use


Could this slicer be used as a replacement for CW? Would you be able to support gcode commands over serial port and display the sliced output via HDMI video?

User avatar
James
Posts: 159
Joined: Mon Dec 02, 2013 1:56 am
Contact:

Re: ChiTu DLP Slicer (supporting export STL)

Postby James » Tue Apr 10, 2018 9:58 pm

No, you have to buy the board. The board was selling for somewhere around $200 at the time of my inquiry. It's a good price being that the software is free. It's a completely closed proprietary system at this time. It's basically what you get when you buy an Anycubic Photon for as low as $470 shipped. I purchased a Photon and I've been loving it more than my other resin based printers including one that I build myself that uses CW. The user inputs are ultra-simplified as can be seen by downloading the software and using it to do slicing. It has just enough inputs that one can experiment around with whatever resin they'd like to try.

One input option that is missing on the Photon version that is highly needed is the option to do antialiasing in the XY plane. The Photon has a pixel resolution of 47 microns, which is pretty good for most types of prints but when getting down to printing miniatures and jewelry it would be nice to be able to activate antialiasing.
I prefer to know nothing about everything rather than everything about nothing. :)

chitu3d
Posts: 8
Joined: Tue Jan 23, 2018 8:52 am

Re: ChiTu DLP Slicer (supporting export STL)

Postby chitu3d » Wed Apr 11, 2018 2:54 am

James wrote:No, you have to buy the board. The board was selling for somewhere around $200 at the time of my inquiry. It's a good price being that the software is free. It's a completely closed proprietary system at this time. It's basically what you get when you buy an Anycubic Photon for as low as $470 shipped. I purchased a Photon and I've been loving it more than my other resin based printers including one that I build myself that uses CW. The user inputs are ultra-simplified as can be seen by downloading the software and using it to do slicing. It has just enough inputs that one can experiment around with whatever resin they'd like to try.

One input option that is missing on the Photon version that is highly needed is the option to do antialiasing in the XY plane. The Photon has a pixel resolution of 47 microns, which is pretty good for most types of prints but when getting down to printing miniatures and jewelry it would be nice to be able to activate antialiasing.


Well, the new version will support anti aliasing. Please pay attention to our FB group:ChiTu 3D Printer Software and Contrroller