[phpBB Debug] PHP Warning: in file [ROOT]/phpbb/session.php on line 574: sizeof(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/phpbb/session.php on line 630: sizeof(): Parameter must be an array or an object that implements Countable
Build Your Own SLA/SLS • Problems with Acer X1173 and Makerjuice G+
Page 1 of 1

Problems with Acer X1173 and Makerjuice G+

Posted: Wed Oct 07, 2015 2:21 pm
by polbo
Hi guys,
ssorry for my English... I don't speak English very well.
I've a Uncia DLP printer witn Acer X1173 projector. Last month I bought a Makerjuice G+ red resin.
I'm not able to have a good print quality and i understand which is the problem. In the internal menu, I set the projector with standard video propreties. Resolution is 1024X768.
My CW configuration is:

Slice thickness: 0,1mm
Exposure time per Layer: 6000ms
Bottom Layers Exposure time: 10000ms
#layers: 3

Enable Anti-Aliasing: activate (1.5)
Export images & GCode: activate

Lift and Sequence time: 10600ms
Z lift distance: 5mm
Build direction: bottom up
Z lift speed: 50mm/m
Z lift retract speed: 100 mm/m
Slide/tilt value:0
Can you help me?

Re: Problems with Acer X1173 and Makerjuice G+

Posted: Fri Oct 09, 2015 1:04 am
by James
Can you take a photograph of the print quality so we can see what the problem is?

Re: Problems with Acer X1173 and Makerjuice G+

Posted: Fri Oct 09, 2015 12:43 pm
by polbo
I hope you can see photo..

Re: Problems with Acer X1173 and Makerjuice G+

Posted: Sat Oct 10, 2015 1:04 am
by James
That's an excellent image, but I have not seen that print error before. Anyone else have any ideas?

Re: Problems with Acer X1173 and Makerjuice G+

Posted: Wed Oct 28, 2015 2:52 am
by polbo
Anyone else?