Uncia Hi performance system kit

[firecardenal]

After several attempts to control the surface tension, finally I have a system that works properly to print on 100,75,50,35,20,10 microns.
This system can be found only on hi end professional printers as Ultra by EnvisionTec.



Forget the problems caused by surface tension, such as bulging effect and others.

https://youtu.be/WGl24ju_1yo

More
information and download for free all the parts and files to make and print at my thingiverse channel.
http://www.thingiverse.com/thing:910771

[dangre]

Very nice design. Can you explain the tilt-up box? Also a quick overview would be appreciated.

[firecardenal]

Hi dangre

Of course.
The real problem with printers with top-down system is the surface tension.
It is impossible to print without repercussions ranging from simple to real disasters.
There are systems that help leveling and smoothing the surface but do not control the surface tension.

The surface tension is the cause of the swelling effect and many other problems related to quality.

The cover of this container has a teflon film on the surface which contacts the resin, this prevents sticking in the top.
The primary function of this system is to flatten the resin against building platform, canceling completely the surface tension.
Also controls the entire level of the resin throughout the print job so exceptional quality is achieved.

[dangre]

Ahhh, now I get it. So its like a flex vat on a bottom-up machine but everything is upside-down. Do you have any issues with sticking to the teflon instead of the build platform? This is the biggest issue with bottom-up. Very intriguing.
Dan

[firecardenal]

Exactly as you said. It is a hybrid system.


No Dan. no problem. my platform has many holes where the resin is perfectly anchor. The Muve film product works perfectly, thank you very much.

[JohnGay]

Love this idea! Might have a look after I get my printer working! Thanx!

[firecardenal]

Hi John

And it works really well.

Just make sure you do everything very precise. to work properly.

[Leinad78]

So, in your opinion, what are the pro´s using this setup over bottom-up in generell? My biggest pro would be that its possible to acchieve serious high print speeds when using top-down due to the surface contact to oxygen.

Having a non permeable film totally kills this pro, in my opinion.

[firecardenal]

I could not answer your question with certainty. I am not an expert, but I think if the big guys are doing, should be good.

I can tell you that this opens a new opportunity to top down printers to competing in quality.

[dangre]

I thought the big guys use a wiper system (and a laser). I'm not sold on the film as that is my biggest issue with my bottom-up but I hope you prove us wrong (adherence issues, stretching on larger parts/heat, degrading over time, increasing exposure time).