Hi all!
Using waxcast and encountering this issue on uneven builds. It also happens on B9 Yellow so must be a hardware issue.
Got any ideas on more accurate builds?
You can see the wavy bottom of the halo collet. I've noticed this on other prints too.
Uneven build issues.
-
- Posts: 59
- Joined: Sun Mar 13, 2016 3:25 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
-
- Posts: 30
- Joined: Tue Feb 04, 2014 9:57 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: Uneven build issues.
You should be able to solve this issue by tilting a few degrees on X or Y your model , just consider the first layer of the halocollet is/are very thin so it remain flexible , when you lift/peel and go back on you vat floor the first layers ( 1-3 depending on you layer thickness ) will be very easy to deform and keep some extra resin in between that will be cured ...
other option is to give a long settle time before exposure on those critical/sensitive layer.
other option is to give a long settle time before exposure on those critical/sensitive layer.