printing with FormLabs resins
Posted: Sat Jan 07, 2017 8:21 am
by jon_bondy
Has anyone used FormLabs resins on the LittleRP? I used Vorex for quite a while, but that appears to no longer be an option. I would appreciate it if anyone could recommend a starting place for exposure settings.
Re: printing with FormLabs resins
Posted: Sun Jan 08, 2017 10:42 pm
by goopyplastic
I have only tried the original clear and grey resins ... and they unfortunately are not really suitable for regular DLP projectors. The cure time becomes quite long, and there is bleeding.
I have heard that the casting resin works ok on dlp but haven't tried it myself.