printing with FormLabs resins
-
- Posts: 78
- Joined: Tue Jun 16, 2015 10:55 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
printing with FormLabs resins
Has anyone used FormLabs resins on the LittleRP? I used Vorex for quite a while, but that appears to no longer be an option. I would appreciate it if anyone could recommend a starting place for exposure settings.
-
- Posts: 236
- Joined: Sat Mar 29, 2014 6:16 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: printing with FormLabs resins
I have only tried the original clear and grey resins ... and they unfortunately are not really suitable for regular DLP projectors. The cure time becomes quite long, and there is bleeding.
I have heard that the casting resin works ok on dlp but haven't tried it myself.
I have heard that the casting resin works ok on dlp but haven't tried it myself.