FTD (FunToDo) resins on LittleRP?
-
- Posts: 236
- Joined: Sat Mar 29, 2014 6:16 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: FTD (FunToDo) resins on LittleRP?
Unfortunately I want to say that FunToDo just isn't real PDMS friendly and would hold up better with a teflon vat. I can get you an underplate which should improve your flexvat experience.
-
- Posts: 28
- Joined: Tue Jan 05, 2016 5:36 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: FTD (FunToDo) resins on LittleRP?
I hope to try out these flexvats with underplates when they become available.
Are the prints failing part way (>5mm z axis) into the print?
I had a similar experience with divots on taller prints using the B9 black resin. This was solved by boosting the retraction rate to 300 and the lift height to 5mm with a couple of seconds settle time. It stopped parts of the print progressively adhering to the PDMS. This appeared to help flush the resin on the surface of the PDMS.
Are the prints failing part way (>5mm z axis) into the print?
I had a similar experience with divots on taller prints using the B9 black resin. This was solved by boosting the retraction rate to 300 and the lift height to 5mm with a couple of seconds settle time. It stopped parts of the print progressively adhering to the PDMS. This appeared to help flush the resin on the surface of the PDMS.